Ar500 Steel Shooting Targets Rifle Pistol 8" X 3/8"

Includes Three 8 inch targets with two 5/8 inch diameter holes for gong mounting and one center hole for stand mounting using 5/8" inch bolt. (chains and bolts not included) These AR500 steel targets work great for most pistol and rifle calibers, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers. 3/8 inch thick AR500 steel targets are rated to 3200 fps at 100 yards and should provide years of reliable use. Shooting targets are painted with a black primer and are ready to paint in the color your want. Please remember that even the best paint will chip when impacted by a bullet. The best practice is to take a spray can of paint with you and repaint every so often so you can see new bullet impacts. Steel shooting targets are manufactured to from new high quality 3/8 inch thick AR500 steel plate made in the USA. Steel shooting targets are cut with a CNC plasma cutter and submersion water cooled during the cutting process to maintain the integrity of the shooting targets, ensuring the longest life. Reversible steel target doubles the life of the shooting target. Reactive targets like this one are proven to increase shooter proficiency up to 50% faster than paper targets. You will become proficient faster and with less ammunition. Shooting AR500 targets instead of paper is both more productive and fun than shooting at paper targets. You will never buy a paper target again once you shoot steel! Always wear eye protection when shooting at steel targets.


Comments:
This is like my 4th order from AR500 Target Solutions, they make great products... Just as a test I took one of these 8" 3/8 plates out in a field where I had several hundred yards in every direction and shoot it several times from 50 yards with my .300 Blk, there was Zero penetration or dents... Just knocked the white paint off on impact points... They are not to be shot at under a 100 yards for safety/ricochet concerns, but I did this as a test with no one around... Great Plates!!! I'll definitely buy again.

Got it out of the mailbox at noon, was hitting them by 1 PM.

Using 45 acp out of my carbine rifle. Paint chips, but no dents. Started at 15 yards, moved back to 50 yards. Ding, Ding, Ding. No back splatter issues. Lots of fun! Even used some hollow point self defense ammo at the 20 yards or more. Only the paint showed signs of contact.

Even if you shoot 2-3 times a year they will save you money in targets. No going down range to tape, mark holes. I'm very please I ordered them!

Excellent product I've hit these targets with everything from 9mm - 308 multiple times and they have held up. I definitely buy from this seller again . The price is also great compared to many other online retailers .

Have hit it with 9mm, 357, 45, 45-70, .223. The 223s put ever so slight pock marks in it, but that is what the instructions said would happen. The ping is audible enough for 125 yards, that is my range limit so I cant say anything regarding longer distances.

These targets arrive very quickly. They are well made. Have only used 9mm and .45 cal pistols on these targets, but they hold up well. Have even hit the ears with rounds and they take the same hit as the rest of the metal. Only broke the wires holding it up.

Excellent steel. Very tough, high quality AR500. I shoot these with rifles all day and they have held up very well.

I will never shoot paper again. Amazing instant "pa-ting"!

Awesome. 7.62x39 FMJ 100 yards, no marks other then paint.

Works as advertised.

Arrived quickly, fine targets.

Name:
E-Mail:
  • bowtiesmilelaughingblushsmileyrelaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypensive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
Type the two words shown in the image: *
Tactical Scorpion Gear Ar500 Laser cut 1/4" target gongs. We utilize a CNC laser cutting table for the cutting of all our AR500 products. one 1/2" mounting hole Hang from both holes for more stability but you can hang from a single hole. 3/8" AR500 steel targets work great for the following
Includes one 11 3/4 X 20 IPDA/ IPSC Target, one 12" round target and one 8" round target with two 5/8" diameter holes for gong mounting and one square center hole for stand mounting using 1/2" carriage bolt hole. (chains and bolts not included) These AR500 steel targets work great for most pistol
This is listing is for ONE 6" diameter gong style target made out of 3/8 AR500 steel plate with one mounting hole. This plate is 3/8 inch thick AR500 steel. Look at my feedback and see you will get your item from a trusted source. You hear producers who cut with laser tell you their targets
Tactical Scorpion Gear Ar500 Laser cut 3/8" target gongs. We utilize a CNC laser cutting table for the cutting of all our AR500 products. Two 1/2 Inch mounting holes ( with thick ears to take hits without breaking) Hang from both holes for more stability but you can hang from a single hole. 3/8"
Tactical. Precise. Tough. When you pack AR500 Target Solutions Targets, it's all about sending hot lead down the range and making freedom "ring". All of our targets are fabricated with certified AR500 steel that are forged in the fires of american patriotism. Shoot how you want. Our targets come
Includes one 11 3/4X 20" IPDA/ IPSC Target with two 1/2" diameter holes for gong mounting and one square center hole for stand mounting using 1/2" carriage bolt hole. (chains and bolts not included) These AR500 steel targets work great for most pistol and rifle calibers, including 9mm, 45ACP, .223,
Includes two 11 3/4X 20" IPDA/ IPSC Target with two 1/2" diameter holes for gong mounting and one square center hole for stand mounting using 1/2" carriage bolt hole. (chains and bolts not included) These AR500 steel targets work great for most pistol and rifle calibers, including 9mm, 45ACP, .223,
Includes one 11 3/4 X 20" IPDA/ IPSC Target & one 2x4 target mount kit with 2"x 1/2" bolt with washers and lock nut includes mounting base. X-base has a huge footprint of 25"x35" for superior target stability. Stand comes apart in seconds for easy transport. Silhouette target has two 1/2" diameter
Set includes six 6 inch diameter round steel shooting paddles for DIY dueling trees. These paddles are 10 inches in length overall, ensuring sufficient upright clearance with a quick full rotation. The pins are 7/8in. x 4in. to provide smooth rotation for thousands of shots. These 3/8in. AR500
IDEAL FOR HOME OR RANGE USE: Take your beer cans to the recycling center and get yourself a proper target. Available in 8 inch - the Powerfly AR500 Targets make a satisfying �clang’ every time a shot connects. The target stand is not included in sale. KNOW WHEN YOU’VE HIT: Each successful