Murray 421409MA Backside Idler Pulley with Approx. 3-3/8-Inch Outside Diameter, reviews, comments

Murray 421409MA Backside Idler Pulley with Approx. 3-3/8-Inch Outside Diameter

Product Description

Genuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.

From the Manufacturer

Genuine Murray flat/backside idler pulley for Murray blade drive and motion drive idler systems. This pulley is approximately has an outside diameter of approximately 3.35" and an inside diameter of .50".


Share on Facebook Share on Twitter Share on Google+
Comments / reviews:
I read other reviews on this, and thought that I may have a hard time getting the replacement at a local shop, and since it was in stock I ordered it and a belt at the same time. The old pulley cracked after about 15 yrs, and cut the old belt, so I did one stop shopping. Everything came on time, and the pulley was a perfect match, not hard to replace, and was back to cutting grass in no time.

a very easy install on my Murray mower . Looks and perform like original part.

My belt stays on now!

Exact fit for replacement on an old Murray rider. The old idler bearing locked up and would have been a pain to figure out a repair, this took care of it at a minimal cost.

Worked perfectly.

Don't know why they make these from plastic. But I guess if my old one held up 20 years before the bearing failed, I guess it's not a big deal. Good buy!

Good buy!

Used this on a 1969 Montgomery Ward 7 horse tiller. The belt engager failed and this was the closest possible fit with little modification. 2 acres tilled up and not a peep of distress out of the idler yet.

Just what I needed for my Murray Wide Body lawn tractor!

Exact replacement part, perfect fit, and came earlier than expected.

Name:
E-Mail:
  • bowtiesmilelaughingblushsmileyrelaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypensive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
Security: *
Murray 690387MA Backside pulley Genuine Murray part Replaces Murray parts 7601131MA, 690387, and 690451
Product DescriptionGenuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.From the ManufacturerGenuine Murray secondary blade drive belt for 46" Murray decks from 1997 to present
Product DescriptionGenuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.From the ManufacturerGenuine Murray blade drive belt for 42" Murray decks from 1990 - 1996.
Murray 690410MA Idler pulley Genuine Murray part Replaces Murray part 690410
Murray 310326MA Idler pulley Genuine Murray part Replaces Murray part 310326
Murray 690409MA Idler pulley measures 2.75-inch diameter Genuine Murray part Replaces Murray part 690409
Murray 672754MA Backside idle pulley Genuine Murray part Replaces Murray part 672754
Product DescriptionGenuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.From the ManufacturerThis auger drive belt fits 8 and 10HP with 16-inch diameter wheels and a 12-inch diameter auger.
Replacement Flat Idler Pulley for Murray. Replaces Murray #91179, 421409. MaxPower pulleys are Made in the USA to meet or exceed original equipment specifications.
Product descriptionBrand New Genuine Murray Backside Flat Idler Pulley... We are an Authorized Murray Dealer... Backside Flat Idler Pulley Genuine Murray Part # 423238MA OD: 4-7/8" ID: 3/8" Height: 1-1/4" Genuine OEM Murray PartFrom the ManufacturerGenuine Murray flat/backside idler pulley for