Maxpower 334133 3/4-Inch Cylinder Muffler, reviews, comments

Maxpower 334133 3/4-Inch Cylinder Muffler
Replacement muffler for Briggs and Stratton #294599
For use on most 5 to 8 HP engines with 3/4-Inch threads in exhaust port or on muffler elbow
3/4-Inch pipe thread
3.7-Pound
Carded

Share on Facebook Share on Twitter Share on Google+
Comments / reviews:
Works good on my 212 predator. Just had to buy a mini header, thread in a 1/2 inch galvanized piped and throw a 1/2"-3/4" adapter coupling and thread it in. Sounds beast on my minibike. I figured the 3/4 muffler would have better flow than the half inch. The only problem is the silver paint is flaking off from the heat but it was cheap so who cares. Now I don't have to listen to the old lady complain about the noise. I wish there was a muffler for her...

It works fine as a muffler. Not super quiet but none of these small engines are. Knocked off one star because the silver paint burned off instantaneously. I thought it was galvanized when I looked at the photo. It is painted silver.

Exactly what I needed

works as advertised..

excellent

Name:
E-Mail:
  • bowtiesmilelaughingblushsmileyrelaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypensive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
Security: *
Replacement muffler for Briggs and Stratton 89966 For use on most 2-1/2 to 3-1/2 HP engines with 1/2-Inch threads in exhaust port 1/2-Inch inside diameter pipe size 3/4-Inch outside diameter pipe size 2.7-Pound
Briggs & Stratton 394569S Lo-Tone muffler Fits 3 to 4 HP Vertical engines with 1/2-inch NPT
Briggs & Stratton 692038 Lo-Tone muffler Fits 6 HP Quantum engines, 625-675 Series
This Briggs & Stratton Lo-Tone muffler is for 10-12.5 HP horizontal and vertical engines. It also has a special RAF reduced noise design.
This Briggs & Stratton muffler is for 8-16 HP horizontal Cast Iron model engines with a 7-inch pipe length and 1-inch NPT.
Muffler For Tecumseh 35056. Replacement Muffler. Fits Tecumseh 35056. Quality design. MaxPower 12493 Muffler For Tecumseh Number 35056.
Stens 105-304 Stens Muffler. REPLACES OEM: Snapper: 5-1996, 7051996, 7051996YP. FITS MODELS: Snapper Riders with 12 and 12.5 HP Briggs & Stratton engines. SPECS: OD: 5", Length: 12" overall, 1" OD pipe.
500cc 17.5 Gross HP Briggs & Stratton Engine with 1-Inch x 3-5/32-Inch Length Crankshaft, tapped 7-16-20. This engine features 12 volt electric start, rewind back-up start and a 9 amp DC alternator. The exhaust manifold and muffler are included but fuel tank is omitted. For use on wide area
Replaces Briggs and Stratton #298830 For use on most 2-4 HP engines with 1/2-Inch threads in exhaust port 1/2-Inch inside diameter pipe size 3/4-Inch outside diameter pipe size Carded
This Briggs & Stratton Super Lo-Tone muffler is for 12.5 and 14 HP (26 CID) Vanguard engines.