Oregon 99-131 Snapper Replacement Lawn Mower Blade for Rear Engine Rider 28-Inch, reviews, comments

Oregon 99-131 Snapper Replacement Blade for Rear Engine Rider 28-Inches. 28" cut, no deflector holes.

Can't tell the difference between this black Oregon blade and the red Snapper. Fits my 28" RER snapper. Wouldn't call this blade sharp out of the package but cuts grass just fine.

Item arrived by due date. Item is as described. Item fit like it should.

A good value replacement blade for the price.

Fit my Snapper mower perfectly and was less than an OEM version.

After a quick hand sharpening the blade cuts great!

Installed this blade in my Snapper rear engine rider, and it cuts like new again. I would definitely buy another one when the time comes.

Just right, great price. Could be sharper, but that's easy to fix. Quick delivery. All good.

Ideal replacement blade for my Snapper. Works fine as expected and arrived on time and secure packaging.

better than original

Well made good blade.

  • bowtiesmilelaughingblushsmileyrelaxedsmirk
Type the two words shown in the image: *
Snapper CRP218520 NINJA RWD Commercial Series Lawn Mower. Snapper commercial series walk mowers are built to last season after season with heavy-duty features such as the 14 Gauge steel mowing deck, steel axle & reinforced bracing. This walk-behind mower has a rear wheel drive system with smooth
Oregon 99-113 Snapper Replacement Blade for Rear Engine Rider 28-Inches. 28" cut, rear engine rider, punched for high lift deflector 79-728.
Oregon 99-112 Snapper Replacement Blade For Rear Engine Rider 30-Inches. 30" cut. Punched for high lift deflector 79-724.
Oregon 99-117 Snapper Replacement Blade For Rear Engine Rider 33-Inches. 33" cut, rear engine riders, punched for high lift deflector 79-728.
Oregon 91-804 Toro Wheelhorse Replacement Blade 14-1/2-Inches. Need 3 for 42" cut, rear discharge.
Oregon 99-103 Snapper Replacement Blade 20-11/16-Inches. 21" cut, steel deck walk behind, Series 9.
DB Electrical SSW2830 Key Switch For Snapper Rear Engine Series 6-11 Rider 1988 To Present 3 Position
Oregon 98-002 MTD Replacement Blade 21-Inches. 21" cut, rear bagger, fits models 312R, 313R, 315R, 488, 828, 848.
REPLACES OEM: Lesco: 050200, Snapper: 1-9515, 7019515, 7019515BMA, 7019515BZ, 7019515BZYP. FITS MODELS: Snapper 28" deck rear engine rider. SPECS: Length: 28", Center Hole: 1 1/16", Outer Hole: 9/16", Center To Center: 7 1/2", Width: 2 3/4", Thickness: .187", Packaging Type: Branded label.
Stens carries a wide variety of OEM/aftermarket replacement parts for small engine outdoor power equipment. Fits SNAPPER 41-inch rear engine rider and 48-inch tractors, series 0 thru 14