Oregon 99-113 Snapper Replacement Lawn Mower Blade for Rear Engine Rider 28-Inch, reviews, comments

Oregon 99-113 Snapper Replacement Blade for Rear Engine Rider 28-Inches. 28" cut, rear engine rider, punched for high lift deflector 79-728.

It arrived on time and was exactly what I expected.

Worked well, good heavy blade.

Good fit. Seems to be of good quality.

Well made and does a great job cutting.

This is an inexpensive blade for my snapper ride-on. It is an exact replacement of the blade on it as far as I can tell. It doesn't come very sharp which makes it safer but needs to be ground when it arrives.

Nothing fancy. Works well. Very convenient with Prime!

great blade perfect fit

I like it. It is easy to put on and I would buy it again.

Great blade. As other reviewers have noted, you do have to take a file to it out of the box to get the paint off of the edge. After that, it cuts like a beast.

Works great. No issues.

  • bowtiesmilelaughingblushsmileyrelaxedsmirk
Type the two words shown in the image: *
Snapper CRP218520 NINJA RWD Commercial Series Lawn Mower. Snapper commercial series walk mowers are built to last season after season with heavy-duty features such as the 14 Gauge steel mowing deck, steel axle & reinforced bracing. This walk-behind mower has a rear wheel drive system with smooth
Oregon 99-131 Snapper Replacement Blade for Rear Engine Rider 28-Inches. 28" cut, no deflector holes.
Oregon 99-112 Snapper Replacement Blade For Rear Engine Rider 30-Inches. 30" cut. Punched for high lift deflector 79-724.
Oregon 99-117 Snapper Replacement Blade For Rear Engine Rider 33-Inches. 33" cut, rear engine riders, punched for high lift deflector 79-728.
Oregon 91-804 Toro Wheelhorse Replacement Blade 14-1/2-Inches. Need 3 for 42" cut, rear discharge.
Oregon 99-103 Snapper Replacement Blade 20-11/16-Inches. 21" cut, steel deck walk behind, Series 9.
DB Electrical SSW2830 Key Switch For Snapper Rear Engine Series 6-11 Rider 1988 To Present 3 Position
Oregon 98-002 MTD Replacement Blade 21-Inches. 21" cut, rear bagger, fits models 312R, 313R, 315R, 488, 828, 848.
REPLACES OEM: Lesco: 050200, Snapper: 1-9515, 7019515, 7019515BMA, 7019515BZ, 7019515BZYP. FITS MODELS: Snapper 28" deck rear engine rider. SPECS: Length: 28", Center Hole: 1 1/16", Outer Hole: 9/16", Center To Center: 7 1/2", Width: 2 3/4", Thickness: .187", Packaging Type: Branded label.
Stens carries a wide variety of OEM/aftermarket replacement parts for small engine outdoor power equipment. Fits SNAPPER 41-inch rear engine rider and 48-inch tractors, series 0 thru 14